BorZit_Systems_Still_Improving.jpg BorZit Systems Factory Store



BORZIT IS A MONEY SAVING INVESTMENT IN TOUGH TIMES---THE AFFORDABLE HANDHELD UNDERGROUND BORING SYSTEM!

Was $269 --- Now Only $239 With 2" Bit! All Bits And Reamers 15% Off.

For Canadian and international orders, please call or E-Mail for shipping charges.


BorZitSystemUSA.jpg
BorZit System with 2" Hard Surfaced Steel Bit
The complete BorZit System consists of the BorZit Tool and 2" hardsurfaced bit, all of which are shipped in a durable polyethylene case. The case has an extra compartment which can hold an optional 3" bit, an extra 2" bit or an optional 1 1/4" bit. Was $269---Now $239!
$239.00
Add to Cart
1.25_Inch_Hard_Surface_Bit.jpg
1 1/4" Hard Surfaced Bit
Smaller bit for installing telephone or low voltage electrical wire. It will also accept 3/4" pipe or conduit. Developed especially for use under asphalt or pavers where there is concern about settling. Was $40---Now $34!
$34.00
Add to Cart
2_Inch_Hard_Surface_Bit.jpg
2" Hard Surface Bit
Bores a full 2" hole which will accomodate a 1 1/2" conduit or pipe without couplings or a 1 1/4" conduit or pipe with couplings. Hard surfacing is welded onto the cutting edges of the wings. This bit is durable in hard, rocky or abrasive soils, or for boring in shale, sandstone or limestone. Was $48---Now $40!
$40.00
Add to Cart
3_Inch_Hard_Surface_Bit
3" Hard Surfaced Bit
Bores a full 3" hole, which will accomodate up to 2" conduit or pipe with couplings. Hard surfacing is welded to the cutting edges of the wings. This bit is durable in hard, rocky or abrasive soils, or for boring in shale, sandstone, or limestone. Was $54--Now $46!
$46.00
Add to Cart
5_Inch_Hard_Surface_Reamer_Bit
5" Hard Surfaced Reamer Bit
Reamer bit enlarges a pilot hole to 5" and will accomodate 3" or 4" pvc conduit or pipe with couplings. This heavy duty reamer has a body machined from 1 1/4" bar stock and has internal threads at each end. It can be pulled back through the pilot hole or pushed through depending on soil conditions and length of the bore. Was $74---Now $63!
$63.00
Add to Cart
7.25_Inch_Hard_Surface_Reamer_Bit.jpg
7 1/2" Hardsurfaced Reamer
Reamer bit enlarges 5" hole to 7 1/2" to accomodate up to 6" PVC pipe with couplings. Designed to be pushed back through the 5" hole. The heavy duty reamer has a body machined from 1 1/4" bar stock with internal threads at each end. Was $89---Now $76!
$76.00
Add to Cart
Core_Bit_Adapter.jpg
Core Bit Adapter
This adapter allows you to use the lightweight BorZit System to bore through concrete, brick, stone counter tops or pool decks. A core bit adapter is NOT needed for boring in soil with the bits we sell. Our bits will NOT bore through concrete or brick. The adapter is designed to fit diamond tipped core bits with 5/8"-11 threads. It is precision machined and zinc plated to resist rusting. Was $36---Now $30!
$30.00
Add to Cart
Tower_GFCI.jpg
Tower Portable GFCI
Portable GFCI Line Cord provides ground fault protection both indoors and out. They interrupt electrical power for equipment loads when leakage to ground is 4-6 millamperes. $50
$50.00
Add to Cart
Well Drilling Kit
4" PVC Cap, pipe coupling, o-rings and fasteners for use in drilling shallow wells and sand points
$23.00
Add to Cart
Aluminum Alloy Housing
Replacement Aluminum Alloy Housing for Borzit Tool--$79.00
$79.00


End Caps for Aluminum Alloy Housing (set)
End Caps for Aluminum Alloy Housing (1 set of 2)--$14.00
$14.00


O-Ring Set
Set of 2 Replacement O-Rings for sealing end caps on Borzit Tool System--$6.00
$6.00


Steel Drive Hex 1/2"
Steel Drive Hex, heat Treated for strength, for 1/2" drive--$8.00
$8.00


Steel Drive Shaft with O-Rings
Replacement Steel Drive Shaft with O-Rings --$67.00
$67.00


4" Bit (Hard Surfaced)
4" Bit (Hard Surfaced) -- $53.00
$53.00